KTU Rework - Nokia RM-240 Model 6500s-1

KTU Rework - Nokia RM-240 Model 6500s-1

 

Here we show you how dismantle a RM-240 (Modell 6500s-1) from nokia. Please pay attention to the indicated places where you must apply preasure to the casing so that you do not damage the pcb:

 

1. remove Lid and battery

Nokia RM-240 - remove Lid and battery

 

2. remove screws from inner cover

Nokia RM-240 - remove screws from inner cover

 

3.push flat screwdriver into the inner side wall on the indicated side

Nokia RM-240 - push flat screwdriver into the inner side wall on the indicated side

 

4. lift pcb up sideways to start getting it released

Nokia RM-240 - lift of sideways pcb from front part

 

5. lift of sideways pcb from front part

Nokia RM-240 - push flat screwdriver or tool to release other side connections

 

6. lift off the keyboard

Nokia RM-240 - lift off the keyboard

 

7. lift off the rest to see the pcb

Nokia RM-240 - lift off the rest to see the pcb

 

8. pull off the display connector from pcb

Nokia RM-240 - pull off the display connector from pcb

 

9.  pull out the camera

Nokia RM-240 - pull out the camera

 

10. lift off the pcb and remove the metal covers

Nokia RM-240 - lift off the pcb and remove the metal covers

 

11. now get pcb ready for rework

Nokia RM-240 - now get pcb ready for rework

 

12. Afix pcb onto holders of turbo IR rework station

Nokia RM-240 - afix pcb onto holders of turbo IR rework station